Author Topic: Project 338 whisper / 338 BR  (Read 2567 times)

JIMMY 808

  • Hero Member
  • *****
  • Posts: 1090
Project 338 whisper / 338 BR
« on: August 21, 2012, 08:01:44 PM »
.
« Last Edit: May 01, 2013, 10:08:40 AM by JIMMY 808 »

JIMMY 808

  • Hero Member
  • *****
  • Posts: 1090
Re: Project 338 whisper / 338 BR
« Reply #1 on: August 22, 2012, 05:21:36 PM »
Thanks Justin.

Ya that scope is older then you and I.  Hopefully after christmas I will be getting a fixed 16 leupold tac and a 30 MOA rail.  The fixed 16 has 142 MOA adjustment and I am going to need it.

JIMMY 808

  • Hero Member
  • *****
  • Posts: 1090
Re: Project 338 whisper / 338 BR
« Reply #2 on: August 23, 2012, 02:07:05 PM »
That would be awesome if you could take some of the sting out of that scope. 

wildmeat

  • Hero Member
  • *****
  • Posts: 751
  • this is my prairie.... this is my home
Re: Project 338 whisper / 338 BR
« Reply #3 on: August 23, 2012, 06:33:13 PM »
any idea how fast that pup is shooting?

JIMMY 808

  • Hero Member
  • *****
  • Posts: 1090
Re: Project 338 whisper / 338 BR
« Reply #4 on: August 23, 2012, 08:45:36 PM »
I was at the range with it yesterday to fire form 50 pieces of brass.  Load was 23gr of 748 which might have been a little light some of the case were coming out sooty this was with a 215gr bullet.  Never did run them over the crony but sighted in 2 inches hi at 100 I had to hold a good 2 feet over the 200 meter chicken to hit     


  My plan is to run 300gr match kings at just below the sound barrier should make it offal quite.  A 300gr match king starting out at 1100fps still carries 950fps at 800 yards.  Trouble is that requires 108 min of elevation